JN0-683 VALUABLE FEEDBACK | JN0-683 REAL QUESTIONS

JN0-683 Valuable Feedback | JN0-683 Real Questions

JN0-683 Valuable Feedback | JN0-683 Real Questions

Blog Article

Tags: JN0-683 Valuable Feedback, JN0-683 Real Questions, JN0-683 Brain Dumps, Exam JN0-683 Details, Examcollection JN0-683 Questions Answers

Exams-boost is responsible for our JN0-683 study materials. Every exam product of Exams-boost have sold to customer will enjoy considerate after-sales service. If you have problems about our JN0-683 study materials such as installation, operation and so on, we will quickly reply to you after our online workers have received your emails. We are not afraid of troubles. We warmly welcome to your questions and suggestions on the JN0-683 Exam Questions. We sincerely hope we can help you solve your problem and help you pass the JN0-683 exam.

Juniper JN0-683 Exam Syllabus Topics:

TopicDetails
Topic 1
  • VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.
Topic 2
  • EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.
Topic 3
  • Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.

>> JN0-683 Valuable Feedback <<

JN0-683 Real Questions | JN0-683 Brain Dumps

With the pass rate is 98.65% for JN0-683 learning materials, our product has gained popularity among candidates, the also send some thank letter for helping them pass the exam successfully. We have a professional team to research the latest information for JN0-683 exam materials, and we can ensure that JN0-683 Exam Dumps you receive are the latest one. What’s more, JN0-683 exam dumps are high quality, and you can pass the exam just one time. We offer you free update for 365 days after purchasing, and our system will send the update version for JN0-683 exam dumps to you automatically.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q25-Q30):

NEW QUESTION # 25
You are deploying an IP fabric with an oversubscription ratio of 3:1.
In this scenario, which two statements are correct? (Choose two.)

  • A. The oversubscription ratio decreases when you add leaf devices.
  • B. The oversubscription ratio increases when you remove leaf devices.
  • C. The oversubscription ratio remains the same when you add leaf devices.
  • D. The oversubscription ratio remains the same when you remove leaf devices.

Answer: B,C

Explanation:
* Understanding Oversubscription Ratio in IP Fabrics:
* The oversubscription ratio in an IP fabric typically refers to the ratio of the available bandwidth at the edge of the network (leaves) to the available bandwidth at the core or spine. A 3:1 oversubscription ratio means that for every 3 units of bandwidth at the leaves, there is 1 unit of bandwidth at the spine.
* Impact of Adding or Removing Leaf Devices:
* Removing Leaf Devices:When you remove leaf devices, the amount of total edge bandwidth decreases while the bandwidth in the spine remains constant. This causes the oversubscription ratio toincreasebecause there is now less total bandwidth to distribute across the same amount of spine bandwidth.
* Adding Leaf Devices:Conversely, when you add leaf devices, the total edge bandwidth increases. Since the spine bandwidth remains the same, the oversubscription ratio would remain the same if the additional leaves consume their share of the available bandwidth proportionally.
Conclusion:
* Option C:Correct-Removing leaf devices increases the oversubscription ratio.
* Option D:Correct-Adding leaf devices typically maintains the oversubscription ratio assuming uniform bandwidth distribution.


NEW QUESTION # 26
You are asked to interconnect Iwo data centers using a method that provides EVPN Type 2 connectivity, is highly scalable, and limits VXLAN tunnels between border leafdevices. What will satisfy these requirements?

  • A. Type 2 seamless stitching
  • B. over the top full-mesh interconnect
  • C. IP VPN
  • D. EVPN Type 2 stretch

Answer: A

Explanation:
* Requirement Analysis:
* The scenario requires a solution to interconnect two data centers that supports EVPN Type 2 connectivity. The solution must be highly scalable and must minimize the number of VXLAN tunnels between border leaf devices.
* Understanding Type 2 Seamless Stitching:
* Option D:Type 2 seamless stitchingis a method used in EVPN to provide Layer 2 connectivity (such as MAC address mobility) across different VXLAN segments. It is scalable because it allows only necessary tunnels to be established between border leaf devices, reducing the overhead of maintaining a full mesh of VXLAN tunnels.
Conclusion:
* Option D:Correct-Type 2 seamless stitching satisfies the requirement by enabling scalable, efficient interconnection of two data centers with minimal VXLAN tunnels.


NEW QUESTION # 27
Exhibit.

Host A is connected to vlan 100 on lead. Host B is connected to vlan 200 on leaf1. Host A and Host B ate unable to communicate. You have reviewed the touting and your hosts have the correct default route (.1) Referring to the exhibit, which two commands will solve the problem? (Choose two.)

  • A. set vlans vn10013-interface irb.100
  • B. set interfaces irb unit 100 family inet address 192-168.100.1
  • C. delete vlans vn200 13-interface irb.200
  • D. set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10

Answer: A,D

Explanation:
In the provided network configuration, Host A is in VLAN 100 and Host B is in VLAN 200. The issue arises because these two hosts are unable to communicate, which indicates that either the interfaces are not properly linked to their respective VLANs, or there is a missing static route required for inter-VLAN routing.
Step-by-Step Analysis:
* VLAN Assignment:
* The exhibit shows that irb.200 is correctly associated with VLAN 200 in the configuration.
However, there is no corresponding irb.100 for VLAN 100. Without irb.100, the network lacks the logical interface to handle routing for VLAN 100. Thus, adding irb.100 to VLAN 100 is necessary.
Command to solve this:
set vlans vn100 13-interface irb.100
* Static Route Configuration:
* For inter-VLAN routing to occur, a static route needs to be configured that allows traffic to pass between different subnets (in this case, between VLAN 100 and VLAN 200). The command set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10 would add a static route that directs all traffic from VLAN 100 to the correct gateway (192.168.200.10), which is necessary to route traffic between the two VLANs.
Command to solve this:
set routing-options static route 0.0.0.0/0 next-hop 192.168.200.10
Explanation of Incorrect Options:
* Option A (delete vlans vn200 13-interface irb.200): This would remove the logical interface associated with VLAN 200, which is not desired because we need VLAN 200 to remain active and properly routed.
* Option B (set interfaces irb unit 100 family inet address 192-168.100.1): This command would incorrectly assign an IP address that does not correspond with the subnet of VLAN 100 (192.168.200.1
/24). This could create a misconfiguration, leading to routing issues.
Data Center References:
For a Data Center, proper VLAN management and static routing are crucial for ensuring that different network segments can communicate effectively, especially when dealing with separated subnets or zones like in different VLANs. This aligns with best practices in DCIM (Data Center InfrastructureManagement) which stress the importance of proper network configuration to avoid downtime and ensure seamless communication between all critical IT infrastructure components.
Ensuring that the correct interfaces are associated with the correct VLANs and having the proper static routes in place are both essential steps in maintaining a robust and reliable data center network.
This detailed analysis reflects best practices as noted in standard data center design and network configuration guides.


NEW QUESTION # 28
Which parameter is used to associate a received route with a local VPN route table?

  • A. VNI
  • B. route-distinguisher
  • C. route-target community
  • D. VLAN ID

Answer: C

Explanation:
* Understanding VPN Route Table Association:
* In MPLS/VPN and EVPN networks, theroute-target communityis a BGP extended community attribute used to control the import and export of VPN routes. It associates received routes with the appropriate VPN route tables on the PE (Provider Edge) routers.
* Function of Route-Target Community:
* The route-target community tag ensures that routes are imported into the correct VRF (Virtual Routing and Forwarding) instance, allowing them to be correctly routed within the VPN.
Conclusion:
* Option A:Correct-The route-target community is used to associate received routes with a local VPN route table.


NEW QUESTION # 29
You are deploying an IP fabric using EBGP and notice that your leaf devices areadvertising and receiving all the routes. However, the routes are not installed in the routing table and are marked as hidden.
Which two statements describe how to solve the issue? (Choose two.)

  • A. You need to configure loops 2.
  • B. You need to configure a next-hop self policy.
  • C. You need to configure as-override.
  • D. You need to configure multipath multiple-as.

Answer: B,D


NEW QUESTION # 30
......

You don't need to install any separate software or plugin to use it on your system to practice for your actual Data Center, Professional (JNCIP-DC) (JN0-683) exam. Exams-boost Juniper JN0-683 web-based practice software is supported by all well-known browsers like Chrome, Firefox, Opera, Internet Explorer, etc.

JN0-683 Real Questions: https://www.exams-boost.com/JN0-683-valid-materials.html

Report this page